Model / type
DYNAMOMETERS DEVELOPED BY TUNERS FOR TUNERS
LEAVE THE COMPETITION BEHIND YOURSELF!
LEAVE THE COMPETITION BEHIND YOURSELF!
Good software calibration of the engine without a dyno is a complicated task that requires pricey equipment. Based on more than 10 years of practice expertise, we developed and precisely tested our own dynamometers. They are functional, they are reliable, they are accurate. And the most pleasant thing: they cost less than analogs.
Dynomax Industrial was established in 2005. For more than 14 years we have been into chip-tuning, engine calibration and racing preparation of various cars and other vehicles. For sure, through our work – we have used different models of dynos. Today, our experience helps to engineer and produce dynamometers directly according to the needs of professional tuners. Our products are designed for continual heavy power duty. Central office and our manufacturing line are located in Tallinn, Estonia. That enables us to provide fast shipping and prompt technical support to Asia, European Union, CIS (former Soviet Republics) and many other parts of the world. We help our clients with installation work and set up. We also teach how to work with our dynos.
Easy-to-use and affordable, because developed for tuning specialists by tuning specialists
Multi-roll system for easy installment and more rotating inertial mass
Synchronized axles allows safe measuring of cars with all AWD drive types and driver support systems
High accuracy of measurements and professional data processing
Mechanical parts and electronics are designed for long-term heavy loads
Quick customer support and training
Creating a custom dyno for individual orders
Inertial dyno is not equipped with electro-magnetic retarder (special brake system) and can serve only for measuring of engine power. This is a great solution for chip-tuning because there is no more obvious way to compare car engine power before software upgrade and after.
Braked dyno is equipped with retarder (special brake system). It is more functional and can serve for more purposes, because along with “inertial mode”, it can create and control load and resistance that is provided to the wheels by the rolls (pulleys) of the dynamometer. This type of dyno is essential for professional car calibration or racing-cars preparations and tuning. Of course, this type of dyno can still be used for simple software upgrades and power measurements.
Rolls of the dyno are specially processed and balanced. They provide minimum vibration, perfect surface traction and create a large inertial mass which is necessary for accurate measurements. Axles are designed for loads up to 3000 kg
AWD models are equipped with multi-roll system for quick and easy vehicle installation and greater inertial mass. All axes are synchronized for measuring cars with all gear types and all torque transfer systems.
Electronic components and software have been designed taking into account the real needs of tuning companies and racing teams. You can test vehicles with output up to 2000 hp. With the help of our dyno’s software you can figure out:
We can develop and produce a dyno according to your needs. All parameters (size, dimensions, load on axes, maximum car power limit and etc) can be changed at your request.
Model / type
braked, synchronized
Dimensions (L x W)
5500 x 3800 mm
Min / Max wheelbase
3300/2250 mm
Min / Max track
2200/900 mm
Roll diameter
325 mm
Minimum tyre diameter
400 mm
Weight per axle
up to 3000 kg
Axles
х 5
Eddy Brake Telma
х 1
Max test speed
250 kph
Modes of operation:
- inertial
- loaded
- road conditions
- constant speed
Pmax - inertial mode
1800 hp
Pmax - Constant speed and Road conditions
2000 hp
Pmax - Dynamic mode from the wheels
2000 hpлс
Accuracy Inertial mode
0,1 %
Accuracy Loaded mode
2 %
Voltage min
AC 220V / 40A
Air Pressure min
6 bar
Extras
Wide Band Lambda
Basic composition
in-pit / surface-mounted
Model / type
all wheels drive, synchronized
Dimensions (L x W)
5500 x 3800 mm
Axles width min/max
3300/2250 mm
Wheelbase min/max
2200/900 mm
Roll diameter
325 mm
Min wheel diameter
400 mm
Weight on axle
3000 kg
Axles
х 5
Vmax
250 kph
Modes of operation:
inertial
Pmax inertial
1800 hp
Accuracy Inertial mode
0,1 %
Voltage min
AC 220V / 40A
Air Pressure min
6 bar
Extras
Wide Band Lambda
Basic composition
in-pit / surface-mounted
Model / type
braked, synchronized
Dimensions (L x W)
5500 x 3800 mm
Min / Max wheelbase
3300/2250 mm
Min / Max track
2200/900 mm
Roll diameter
250 mm
Minimum tyre diameter
400 mm
Weight per axle
3000 kg
Axles
х 5
Eddy Brake Telma
х 1
Max test speed
250 kph
Modes of operation:
- inertial
- loaded
- road conditions
- constant speed
Pmax - inertial mode
1800 hp
Pmax - Constant speed and Road conditions
2000 hp
Pmax - Dynamic mode from the wheels
2000 hp
Accuracy Inertial mode
0,1 %
Accuracy Loaded mode
2 %
Voltage min
AC 220V / 40A
Air Pressure min
6 bar
Extras
Wide Band Lambda
Basic composition
in-pit / surface-mounted
Model / type
Braked
Dimensions (L x W)
1200 x 3620 mm
Wheelbase min/max
2200/900 mm
Roll diameter
325 mm
Min wheel diameter
400 mm
Weight on axle
3000 kg
Axles
х 2
Eddy brake Telma
х 1
Vmax
250 kph
Modes of operation:
- inertial
- loaded
- road conditions
- constant speed
Pmax - inertial mode
600 hp
Pmax - Constant speed and Road conditions
1200 hp
Pmax - Dynamic mode from the wheels
1200 hp
Accuracy Inertial mode
0,1 %
Accuracy Loaded mode
2 %
Voltage min
AC 220V / 40A
Air Pressure min
6 bar
Extras
Wide Band Lambda
Basic composition
in-pit / surface-mounted
Model / type
inertial
Dimensions (L x W)
1200 x 3000 mm
Wheelbase min/max
2200/900 mm
Roll diameter
325 mm
Min wheel diameter
400 mm
Weight on axle
3000 kg
Axles
х 2
Vmax
250 kph
Modes of operation:
inertial
Pmax inertial
600 hp
Accuracy Inertial mode
0,1 %
Voltage min
AC 220V / 40A
Air Pressure min
6 bar
Extras
Wide Band Lambda
Basic composition
in-pit / surface-mounted
Please, message us or call us or write us a letter or contact through the contact form below – we'll answer you asap and will find exact solution for your business with the best price you can find on the market!
Official and exclusive distributor of DYNOMAX products in the world “DMT” Company.
Russian Federation, Moscow region, Solnechnogorskiy district, Brekhovo village, street Prudnaja 1